Electromagnetic Chuck Lifting Tool for Double Girder Bridge Cranes: A Powerful Tool for Fast and Stable Steel Plate/Rebar Lifting
Tired of steel plates getting stuck in hooks and rebar stacks scattered everywhere? With this electromagnetic chuck lifting tool, double girder bridge cranes can achieve seamless, one-step transfer of steel plates/rebars in the workshop – no need for bundling or hooks, just a single suction and stability, doubling the efficiency of material flow in the workshop!
TEchnical Parameters:
| Lifting Capacity | 5-50 tons |
| Lifting Material | Stickness steel plate: 0-50mm 3-5 pieces (total thickness ≤ 200mm)
steel bar: Φ12-32mm 1-2 bundles (single bundle weight ≤ rated suction force) |
| Power Failure Magnetic Retention | Built-in battery maintains magnetism, with a magnetism retention time of ≥30 minutes |
| Control Mode | Bridge Crane Control Console Linkage / Wireless Remote Control (Optional) |
Exclusively for Double Girder Bridge Cranes: Seamless Fit, Maximum Load Capacity
As the perfect partner for double girder bridge cranes, it perfectly matches 5-50t class double girder bridge cranes: the suction cup body is welded with high-strength manganese steel, and the rated suction force of a single suction cup can reach 1.5 times the load capacity of the bridge crane. Even steel plates up to 50mm thick or bundles of rebar with a diameter of 32mm can be firmly supported, ensuring the bridge crane remains stable and undisturbed during lifting and movement.
One-Click Stability: Handles Steel Plates and Rebars
Steel Plate Lifting: Flat Adhesion, Multiple Plates Stacked
The extra-large electromagnetic chuck can tightly adhere to the surface of steel plates, even multiple thin steel plates stacked together, and can adsorb 3-5 plates at once (total thickness ≤200mm), avoiding the trouble of traditional hooks "getting stuck and difficult to lift". Steel plates being loaded into machinery plants and finished products being transferred in steel mills can be simply "picked up and moved".
Rebar Lifting: Dense Grip, No Scattering or Dropping
Targeting the loose characteristics of rebar, the chuck uses a dense magnetic circuit design, instantly gathering bundles of rebar (diameter 12-32mm) with a single suction. During lifting, there will be no problems with single bars slipping or loose stacks, making stacking in rebar processing plants and material transfer on construction sites worry-free and safe.
Maximum Safety: No Falling, No Detachment
Built-in Power-Off Magnetization System: Even in the event of a sudden power outage, the suction cup maintains its suction force for over 30 minutes, eliminating the risk of material falling. Combined with overload protection, audible and visual alarms for suction status, and automatic pre-lift detection of suction strength (no start if not up to standard) – the "safety line" for material handling in the workshop is practically welded shut.
Double Efficiency: Saves Manpower and Time
Compared to the cumbersome process of "manual binding and hook alignment" with traditional hooks, this system requires no auxiliary tools. Operators can complete suction/unloading with a single button start/stop, reducing single-trip lifting time by 60%. What used to take two people an hour to load steel plates and transfer rebar in the workshop can now be done by one person in 15 minutes.
Whether it's raw material warehousing in steel mills, steel plate loading in machinery plants, or stacking and transferring rebar in rebar processing plants – the double-girder bridge crane + this electromagnetic chuck lifting device is the kingpin for "stable, fast, and economical" material handling in the workshop.