Steel Plate Lifting "Screen-Free Miracle": Multiple Vacuum Suction Cup Lifting Device Saves Labor and Protects Plate Surface!
Are you still struggling with hooks and wire ropes when lifting steel plates in your workshop? The tying fee alone costs 10 minutes of labor, not to mention the risk of damaging the plate surface and causing it to wobble.
This multi-set vacuum suction cup lifting device is the "precise helper" for steel plate lifting—simply suction the plate, and it lifts it steadily and gently, protecting the plate surface and saving effort!
Technical Parameters:
| Lifting Capacity | 5t/10t/15t/20t (larger load capacity options available) |
| Suction Cup Configuration | Number of suction cups: 6 sets (5t model) / 10 sets (10t model) / 14 sets (15t model) (evenly distributed) Suction cup type: Wear-resistant nitrile rubber suction cups (suitable for smooth/rough steel plate surfaces) Suction cup diameter: 200mm/250mm/300mm (corresponding to different load capacities) Suction cup spacing: 500mm-1500mm (manual/electric adjustable, suitable for different sizes of steel plates) |
| Power Type |
Pneumatic (Common) / Electric Pneumatic: Working air pressure 0.6-0.8MPa, with vacuum generator Electric: 380V three-phase AC, with vacuum pump |
| Vacuum Performance |
Vacuum degree: -85kPa~-95kPa (stable adsorption force) |
| Compatible steel plate parameters |
Steel plate thickness: 5mm-50mm (customizable for thinner/thicker plates) |
Why is it the "optimal solution" for steel plate lifting?
No damage to the plate surface, even precision parts can be transported. The flexible vacuum suction cups adhere to the surface of the steel plate, eliminating the need for hooks or ties. It won't scratch the delicate paint on galvanized or stainless steel plates, nor will it deform thin steel plates, perfectly meeting the "essential need for plate surface protection" in sheet metal and precision machining workshops.
Lifting completed in 1 minute, saving half the labor. Multiple suction cups simultaneously adsorb, eliminating the need for manual climbing, securing, and adjusting hook positions. Remote control operation allows for a simple "pick and release" lifting operation, saving at least 5-8 minutes per trip, resulting in over a dozen more trips per day.
Incredibly stable and safe. Equipped with a vacuum pressure holding and power-off self-locking device, even in the event of a power outage, the suction cups firmly hold the steel plate (pressure holding time ≥30 minutes), reducing the risk of "wobbling and slipping" compared to hook lifting, significantly upgrading workshop safety.
One lifting tool handles multiple steel plate sizes. The suction cup spacing is flexibly adjustable, adapting to narrow steel plates (1 meter wide), wide plates (3 meters long), and steel plates with thicknesses from 5mm to 50mm without changing the lifting tool, saving the cost of multiple lifting tools.
Whether it's loading and unloading materials in the sheet metal workshop, storing and transferring steel plates, or precisely feeding materials on the cutting line, once this lifting device is mounted on the overhead crane, all the "slow, damaging, and dangerous" aspects of steel plate lifting are solved.